Dell E1913 Safety, Environmental, and Regulatory Information - Page 4

Safety, Environmental, and Regulatory Information • Do not allow your portable computer or adapter to operate with the base resting directly on exposed skin for extended periods of time. The surface temperature of the base will rise during normal operation, particularly when AC power is present. Allowing sustained contact with exposed skin can cause discomfort or burn. • Contact Dell (or an authorized dealer or service center for retail purchases) if your equipment does not operate normally. When Working Inside Your Device Do not attempt to service the equipment yourself, except as explained in your Dell documentation or in instructions otherwise provided to you by Dell. Always follow installation and service instructions closely. Some internal components, such as PC Cards, may become very warm during normal operation. Before touching any internal components, allow time for them to cool. Disconnect all cables from the portable computer including the phone cable before opening the memory/modem access door. This product may contain Optical Disk Drives (ODD), such as a CD-ROM, CDR/W, DVD drive, etc., which have built-in laser devices. To prevent any risk of exposure to laser radiation, do not disable or open any ODD assembly for any reason. These ODDs comply with safety requirements and are classified as Class 1 Laser Products, under the US DHHS Standard and IEC/EN60825-1 Laser Safety Standard. These ODD devices contain no user adjustments nor any user serviceable or replaceable parts. NOTE: Additional user information for your optical storage device may be available under the "Manuals" section at support.dell.com. WARNING: Hazardous moving parts. Keep away from the moving fan blades. NOTE: The fan module in your computer may not look exactly like the one shown in the illustration above. 4