Dell E2310HWFP User's Guide - Page 16

Adjust, COLOR SETTINGS, Color Setting, Input Color Format, YPbPr, Mode Selection, Graphics, Video,

Get Dell E2310HWFP PDF manuals and user guides View all Dell E2310HWFP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Auto Adjust Use this key to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self INPUT SOURCE Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor b (Coarse) and Phase (Fine) controls under Image Settings. NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables. Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor. VGA DVI-D Scan for Sources COLOR SETTINGS Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source. Select DVI-D input when you are using the Digital (DVI) connector. Push Select Auto Select to scan for available input signals. to select the DVI input source. Use the Color Setting menu to adjust the monitor's color settings. Input Color Format Mode Selection Preset Mode Allows you to set the video input mode to: l RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDMI to DVI adapter l YPbPr: Select this option if your DVD player supports only YPbPr output. Allows you to set the display mode to: l Graphics: Select this mode if your monitor is connected to your computer. l Video: Select this mode if your monitor is connected to a DVD player. NOTE: Depending upon the Display Mode you select the Preset Modes available for your monitor change. Allows you to choose from a list of preset color modes. In the Graphics mode, you can set the color to the following preset values:

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
Auto
Adjust
Use this key to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monit
Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can fu
(Coarse) and Phase (Fine) controls under Image Settings.
NOTE:
Auto Adjust does not occur if you press the button while there are no active video input signals or attached cab
INPUT SOURCE
Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor.
VGA
Select VGA input when you are using the analog (VGA) connector. Push
to select the VGA input source.
DVI-D
Select DVI-D input when you are using the Digital (DVI) connector. Push
to select the DVI input source.
Scan for Sources
Select Auto Select to scan for available input signals.
COLOR SETTINGS
Use the
Color Setting
menu to adjust the monitor's color settings.
Input Color Format
Allows you to set the video input mode to:
l
RGB
: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDM
l
YPbPr
: Select this option if your DVD player supports only YPbPr output.
Mode Selection
Allows you to set the display mode to:
l
Graphics
: Select this mode if your monitor is connected to your computer.
l
Video
: Select this mode if your monitor is connected to a DVD player.
NOTE:
Depending upon the Display Mode you select the Preset Modes available for your monitor change.
Preset Mode
Allows you to choose from a list of preset color modes.
In the
Graphics
mode, you can set the color to the following preset values: