Dell E600i Installation Guide - Page 24
Remove the AC Power Supply, Power Cord, Thumb Screw, Cord Retainer
View all Dell E600i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
www.dell.com | support.dell.com Step Task 6 Toggle the power supply switch to the ON position, and verify that Status LED lights green. Remove the AC Power Supply CAUTION: This unit has more than one power supply connection; all connections must be removed to remove all power from the unit. ATTENTION: Cette unité est équipée de plusieurs raccordements d'alimentation. Pour supprimer tout courant électrique de l'unité, tous les cordons d'alimentation doivent être débranchés. WARNUNG: Diese Einheit verfügt über mehr als einen Stromanschluß; um Strom gänzlich von der Einheit fernzuhalten, müssen alle Stromzufuhren abgetrennt sein. To remove an AC power supply unit: Step Task 1 Determine if the system is operating in power supply redundancy. If the system is operating with non-redundant power, removing a power supply powers down the system. 2 Toggle the power switch on the on the unit to the OFF position. 3 Unplug the power cord from the AC Power Supply and the AC power outlet. a Loosen the power cord retainer thumb screw. b Rotate the retainer clockwise away from the socket and unplug the power cord from the socket. Figure 6-4. Removing the AC Power Cord Thumb Screw Cord Retainer Power Cord 4 Loosen the locking screws. 5 Slide the power supply out of the slot. 6 If you are not replacing the power supply, place a power supply blank in the empty slot. 24 | Power Supply