Dell E6500 Service Manual - Page 34
Hinge Covers - displayport
UPC - 884116029793
View all Dell E6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Back to Contents Page Hinge Covers Dell™ Latitude™ E6500 Service Manual Removing the Hinge Covers Replacing the Hinge Covers Removing the Hinge Covers Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance. The hinge covers are not interchangeable; the left one covers the Multimode DisplayPort, and the right one covers the RJ-45 network connector. 1. Follow the procedures in Before Working on Your Computer. 2. Close the display and turn the computer over. 3. Remove the two M2.5 x 5-mm screws from the hinge covers. 4. Slide each hinge cover off the computer and lift to remove it. 1 hinge covers 2 RJ-11 network connector 3 M2.5 x 5-mm screws (2 each) 4 Multimode DisplayPort Replacing the Hinge Covers 1. Slide the left hinge cover over the Multimode DisplayPort and slide the right hinge cover over the RJ-45 network connector. 2. Replace the two M2.5x5-mm screws in each hinge cover. Back to Contents Page