Dell EqualLogic PS6210XS PS6210 Installation and Setup Guide
Dell EqualLogic PS6210XS Manual
View all Dell EqualLogic PS6210XS manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell EqualLogic PS6210XS manual content summary:
- Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 1
Dell EqualLogic PS6210 Storage Arrays Installation and Setup Guide - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 2
- Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 3
Dell EqualLogic PS6210 Storage Arrays Installation and Setup Guide Regulatory Model Series E04J and E05J - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 4
Inc. All rights reserved. Dell™ and EqualLogic® are trademarks of Dell Inc. All trademarks and registered trademarks mentioned herein are the property this material in any manner whatsoever without the written permission of Dell is strictly forbidden. Published: October 2013 Part Number:NTCKY_A01 - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 5
the Array Installation Procedure 1 2 Rack Mounting the Array 3 Before You Begin 3 Protecting Hardware 4 Steps for Mounting an Array in a Rack 5 3 Connecting the Array Cables 9 Network Requirements and Recommendations 9 Minimum and Recommended Cable Configurations 10 Connect - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 6
Table of Contents iv - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 7
Preface This manual describes how to install Dell™ EqualLogic® PS6210 storage array hardware, configure the software, and start using the iSCSI SAN array. With one or more PS Series storage arrays, you can create a PS Series group-a self-managing, - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 8
box. For information about registering a warranty, visit onlineregister.com/dell. Further Information For basic storage array information, maintenance information, and troubleshooting information, refer to the Hardware Owner's Manual for your PS Series array. Note, Caution, and Warning Symbols - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 9
iSCSI SAN array, follow these steps: 1. Install the array in a rack. See Rack Mounting the Array on page 3. 2. Connect the array to power and the network. See Connect and Secure the Power Cables on page 11 and Connect the Array to the Network on page 12. 3. Configure the PS Series software. First - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 10
PS6210 Install and Setup Guide 1 Understanding the Array Installation Procedure 2 - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 11
power and network cables, as described in Chapter 3. Before You Begin Before installing the array: • Register for a Dell™ EqualLogic® Customer Support Account. If you do not have a customer service support account, go to eqlsupport.dell.com and create one. • Download and read the Release Notes from - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 12
Install and Setup Guide 2 Rack Mounting the Array • There is at least 4.1 cm (1.6 inches) between the rack door and the front of the array to accommodate the array front bezel. • The rack (with installed location is properly vented. • Your environment supports all of the requirements listed in the - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 13
, round, or threaded mounting holes. Follow the installation instructions included with the kit to install the array into a rack. The following documentation is included in the shipping box: • Setup poster • Installation and Setup Guide (this document) • License, regulatory, and warranty information - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 14
PS6210 Install and Setup Guide 2 Rack Mounting the Array 2. Attach the mounting rails to the rack. 3. Slide the chassis into the rack. 4. Attach the chassis to the front of the mounting rails. 5. Install the bezel. These steps are described in detail in the following sections. Determine Where to - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 15
PS6210 Install and Setup Guide 2 Rack Mounting the Array With assistance, lift the the front of the mounting rails, and manually secure the captive fasteners to the rails. Note: Do not overtighten the thumbscrews. Installing the Bezel The steps for installing the bezel are the same for all array - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 16
PS6210 Install and Setup Guide 2 Rack Mounting the Array Figure 4: Installing the Bezel (4U Array) 8 - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 17
about network requirements, see the Dell EqualLogic Configuration Guide on the Dell TechCenter website at en.community.dell.com/techcenter/storage/w/wiki/2639.equallogic-configuration-guide.aspx. General network configuration is beyond the scope of this manual. Table 3: Network Recommendations - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 18
PS6210 Install and Setup Guide 3 Connecting the Dell EqualLogic Group Manager Administrator's Manual, and the Dell EqualLogic Group Manager CLI Reference Guide for more information about DCB. Minimum and Recommended Cable Configurations For a dual control module array, the recommended configuration - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 19
PS6210 Install and Setup Guide 3 Connecting the Array Cables Connect and Secure the Power Cables Obtain the power cables that were shipped with the array. If the array was not shipped with power cables, contact your PS Series support provider or reseller for power cable information. Note: The - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 20
PS6210 Install and Setup Guide 3 Connecting the Array Cables Figure 6: Connecting the AC Power Cables (2U Array) Figure 7: Connecting the AC Power Cables (4U Array) Connect the Array to the Network The PS6210 array model includes two Type 15 control modules. Each Type 15 control module includes - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 21
PS6210 Install and Setup Guide 3 Connecting the Array Cables Turning On the Array Before will start to synchronize. LEDs will indicate these normal activities. The battery backup unit installed in each controller is shipped in a partially discharged state. The first time the system is powered on - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 22
, you do not need a serial connection. For information about Remote Setup wizard requirements, see the Host Integration Tool for Microsoft® Installation and User's Guide or the Host Integration Tool for Linux® Installation and User's Guide. The serial cable shipped with the array is a standard null - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 23
PS6210 Install and Setup Guide 3 Connecting the Array Cables Figure 10: Connecting a Serial Cable to the Array (4U Array) Serial Cable Pinout Information Figure 11 shows the pin locations on - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 24
PS6210 Install and Setup Guide 3 Connecting the Array Cables 16 - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 25
for configuring the software. Choose one method: • Use the Remote Setup wizard, either for Windows or Linux. For instructions about using the Remote Setup wizard, see the Dell EqualLogic Host Integration Tools for Microsoft Installation and User's Guide or the Dell EqualLogic Host Integration - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 26
PS6210 Install and Setup Guide 4 Software Configuration Prompt RAID policy Description RAID level and spare drive configuration for the array. The when creating a new group. CHAP user name and password used to enable Microsoft service (VSS or VDS) access to the group. The user name must have 3 - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 27
PS6210 Install and Setup Guide 4 Software Configuration Note: If the array does not respond, contact your PS Series support provider 2013 Dell Inc. It appears that the storage array has not been configured. Would you like to configure the array now? (y/n) [n] y Group Manager Setup Utility Do - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 28
the Host Integration Tools kit from the support website. 3. Install the Remote Setup wizard following the instructions in the Host Integration Tools documentation. 4. Start the Remote Setup wizard by clicking: Start, Programs, EqualLogic, Remote Setup Wizard 5. In the Welcome dialog box, select - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 29
Install and Setup Guide 4 Software Configuration If you used the setup utility to create or expand a group, or added the array to an existing group with the Remote Setup to Set the RAID Policy For the latest information on browser support for the Group Manager GUI, see the PS Series Release Notes - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 30
PS6210 Install and Setup Guide 4 Software Configuration 22 - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 31
configure a volume with thin provisioning. However, thin provisioning is not appropriate for all storage environments. See the Dell EqualLogic Group Manager Administrator's Guide 3. Use the following command to create an access control record for the volume: volume select volume_name access create - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 32
PS6210 Install and Setup Guide 5 Storage Allocation You can create a maximum of 16 access control records for a volume. The following example creates a 50GB volume and one access control record. Only a computer with the specified initiator name will be able to access the volume. group1> volume - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 33
PS6210 Install and Setup Guide 5 Storage Allocation Field folder Storage pool assignment provisioning is enabled, this illustration becomes a space allocating tool outfitted with 3 sliding pointer controls colored purple, yellow, and red, respectively. Click and drag the pointers to slide - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 34
PS6210 Install and Setup Guide 5 Storage Allocation Step 3: Configure iSCSI Access Field Description What kind of access type do you want for this volume? Allows you to set the access controls for the volume. Select the radio button for the type of access you want: • Copy access controls from - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 35
equallogic.5-4a0900-2f00000-007eca92d654f160-dbvol To connect a computer to a volume: 1. Install and configure an iSCSI initiator on the computer. Hardware and software initiators are available from different vendors. Configure your initiator using the instructions provided by the vendor. Note: Dell - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 36
PS6210 Install and Setup Guide 5 Storage Allocation volume select volume_name show - Using the GUI, expand to specify the group IP address as the iSCSI discovery address. If the initiator supports the discovery process, it will return a list of iSCSI targets that the computer can access. If - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 37
's Manual provides basic storage array information, maintenance information, and troubleshooting information for your PS Series storage array hardware. • The Dell EqualLogic Group Manager Administrator's Guide provides details about configuring and using the PS Series firmware that is installed on - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 38
PS6210 Install and Setup Guide 6 Where to Go After Setting Up a Group Task Configure SNMP Configure iSNS Configure CHAP accounts Modify the date, time, or time zone or configure NTP Add a member to the group Create pools Description To monitor traps from the group, you can use SNMP. In addition, - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 39
Manual provides information about system features and describes how to troubleshoot the system and install or replace system components. This document is available online at eqlsupport.dell dissipation Input frequency Max input power Maximum inrush current PS6210X, XV (2.5-inch drives), S, XS: • 700 - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 40
Install and Setup Guide XV (2.5-inch drives), S, XS: 54.1 cm (21.3 inches) PS6210X, XV (2.5-inch drives), S, XS: 24.1 kg (53 lb) PS6210E, XV drives): 44.45 kg (98 lb) Available Hard Drive Power (Per Slot) Supported hard For 2.5-inch drives: drive power consumption (continuous) • Up to 1.2 - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 41
records creating 24 access controls setting up with CLI 23 accounts configuring after setup 29 array choosing where to mount 6 initializing 17 mounting in rack 6 network address 17 RAID policy 20 software configuration 17 B battery charging time 13 bezel installing 7 C cables 10GB copper 9 10GB - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 42
supported 20 RAID policy description 20 setting with CLI 21 setting with GUI 21 Remote Setup Wizard configuring the software 20 34 S safety precautions installation 30 V VLAN recommendation 10 volumes access control records creating 24 access controls 24 accessing from a computer 27 connecting to - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 43
naming 23 reported size 23 snapshot space 23 target name for 27 thin provisioning settings 23 W warranty 31 Index: warranty - warranty 35 - Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 44
- Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 45
- Dell EqualLogic PS6210XS | PS6210 Installation and Setup Guide - Page 46
Printed in www.dell.com | support.dell.com
Dell EqualLogic PS6210 Storage Arrays
Installation and Setup Guide