Dell Force10 S60-44T Quick Start Guide - Page 21

Table 2-1. Pin Assignments Between the Console and a DTE Terminal Server S55/S60 RJ-45 to RJ-45 Rollover Cable RJ-45 to DB-9 Terminal Console Port Adapter Server Device Signal RJ-45 pinout RJ-45 Pinout DB-9 Pin Signal NC 2 7 6 DSR TxD 3 6 2 RxD GND 4 5 5 GND GND 5 4 5 GND RxD 6 3 3 TxD NC 7 2 4 DTR CTS 8 1 7 RTS USB-B Console The USB-B connector port is labeled on the S55/S60 chassis. It is to the left of the management ports, as you face the rear of the chassis. S55 USB-B Port S60 USB-B Port Step Task 1 Power on the PC (XP operating system recommended). 2 Connect the USB-A end of cable (supplied) into an available USB port on the PC. 3 Connect the USB-B end of cable into the USB-B console port on the chassis. 4 Power on the chassis. 5 Install necessary USB device drivers (internet connection required). Contact Dell Force10 TAC for CD, if necessary. Installing the Software 19