Dell G7 17 7700 Service Manual - Page 82
Table 9. System setup options-Power menu continued, Table 10. System setup options-Security menu
View all Dell G7 17 7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Table 9. System setup options-Power menu (continued) Power Block Sleep Blocks the computer from entering Sleep (S3) mode in the operating system. Default: OFF NOTE: If enabled, the computer will not go to sleep, Intel Rapid Start will be disabled automatically, and the operating system power option will be blank if it was set to Sleep. Lid Switch Enable Lid Switch Enables or disables the lid switch. Default: ON Power On Lid Open Enables the computer to power up from the off state whenever the lid is opened. Default: ON Intel Speed Shift Technology Enables or disables the Intel Speed Shift Technology support. Setting this option to enable allows the operating system to select the appropriate processor performance automatically. Default: ON Table 10. System setup options-Security menu Security TPM 2.0 Security On Select whether or not the Trusted Platform Model (TPM) is visible to the OS. Default: ON PPI Bypass for Enable Commands Enables or disables the OS to skip BIOS Physical Presence Interface (PPI) user prompts when issuing TPM PPI enabled and activate commands. Default: OFF PPI Bypass for Disable Commands Enables or disables The OS to skip BIOS PPI user prompts when issuing TPM PPI Disable and Deactivate commands. Default: OFF PPI Bypass for Clear Commands Enables or disables the operating system to skip BIOS Physical Presence Interface (PPI) user prompts when issuing the Clear command. Default: OFF Attestation Enable Enables to control whether the TPM Endorsement Hierarchy is available to the OS. Disabling this setting restricts the ability to use the TPM for signature operations. Default: ON Key Storage Enable Enables to control whether the TPM Endorsement Hierarchy is available to the OS. Disabling this setting restricts the ability to use the TPM for storing owner data. Default: ON SHA-256 Enables or disables the BIOS and the TPM to use the SHA-256 hash algorithm to extend measurements into the TPM PCRs during BIOS boot. Default: ON Clear Enables or disables the computer to clear the PTT owner information, and returns the PTT to the default state. Default: OFF TPM State Enables or disables the TPM. This is the normal operating state for the TPM when you want to use its complete array of capabilities. Default: Enabled 82 System setup