Dell Inspiron 11 3135 Inspiron 11 3135 Owners Manual - Page 42
Replacing the Display Assembly, Procedure, Postrequisites
View all Dell Inspiron 11 3135 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Replacing the Display Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Place the palm-rest assembly on the display assembly. 2 Align the screw holes on the palm-rest assembly with the screw holes on the display hinges and press down the display hinges to close the palm-rest assembly. 3 Replace the screws that secure the display assembly to the palm-rest assembly. 4 Connect the display cables to the system board. 5 Route the antenna cables through the routing guides on the fan. 6 Connect the antenna cables to the wireless card. Postrequisites 1 Replace the hard drive. See "Replacing the Hard Drive" on page 20. 2 Replace the battery. See "Replacing the Battery" on page 13. 3 Replace the base cover. See "Replacing the Base Cover" on page 11. 42 | Replacing the Display Assembly