Dell Inspiron 13 7000 Series 2-in-1 Inspiron 13 7347 Service Manual - Page 35
Replacing the Power and Volume-Buttons Board, Procedure, Post-requisites
View all Dell Inspiron 13 7000 Series 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Replacing the Power and Volume-Buttons Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Place the power and volume-buttons board into the slot on the palmrest and keyboard assembly. 2 Adhere the adhesive tape that secures the power and volume-buttons board to the speaker. 3 Route the power and volume-buttons board cable through the routing guides on the speaker. 4 Connect the power and volume-buttons board cable to the system board. 5 Adhere the adhesive tape that secures the power and volume-buttons board cable to the palmrest and keyboard assembly. Post-requisites 1 Follow the procedure from step 4 to step 6 in "Replacing the Hard Drive". 2 Replace the battery. 3 Replace the base cover. 35