Dell Inspiron 13 7347 Inspiron 13 7347 Service Manual - Page 64
Replacing the Display Assembly, Procedure, Post-requisites
View all Dell Inspiron 13 7347 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Replacing the Display Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure CAUTION: Place the computer on a soft and clean surface to avoid scratching the display. 1 Place the display assembly on the palmrest and keyboard assembly. 2 Align the screw holes on the display hinges with the screw holes on the palmrest and keyboard assembly. 3 Adhere the adhesive tape that secures the the display cable to the palmrest and keyboard assembly. 4 Replace the screws that secure the display assembly to the palmrest and keyboard assembly. 5 Turn the computer over and close the display. 6 Slide the Windows button-board connector into the connector latch on the system board and press down the latch to secure the cable. 7 Adhere the tape to the Windows button-board cable. 8 Connect the display cable to the system board. 9 Align the screw holes on the display-cable bracket with the screw holes on the system board. 10 Replace the screws that secure the display-cable bracket to the system board. 11 Connect the antenna cables to the wireless card. Post-requisites 1 Replace the battery. 2 Replace the base cover. 64