Dell Inspiron 13z N311z Inspiron 13z N311Z Owners Manual - Page 60
Replacing the System Board
View all Dell Inspiron 13z N311z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
12 Disconnect the DC-in connector cable from the connector on the system board. 1 2 1 DC-in connector cable 2 screws (3) 13 Remove the three screws that secure the system board to the computer base. 14 Carefully ease the connectors on the system board out of the slots in the computer, and lift the system board out of the computer. 15 Turn the system-board assembly over. 16 Remove the heat-sink assembly. See "Removing the Heat-Sink Assembly" on page 63. Replacing the System Board 1 Follow the instructions in "Before You Begin" on page 9. 60 System Board
60
System Board
12
Disconnect the DC-in connector cable from the connector on the system
board.
13
Remove the three screws that secure the system board to the computer
base.
14
Carefully ease the connectors on the system board out of the slots in the
computer, and lift the system board out of the computer.
15
Turn the system-board assembly over.
16
Remove the heat-sink assembly. See "Removing the Heat-Sink Assembly"
on page 63.
Replacing the System Board
1
Follow the instructions in "Before You Begin" on page 9.
1
DC-in connector cable
2
screws (3)
1
2