Dell Inspiron 14 3437 Owner's Manual - Page 46
Replacing the Power-Adapter Port, Procedure, Postrequisites
View all Dell Inspiron 14 3437 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Replacing the Power-Adapter Port WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 11. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Procedure 1 Slide the power-adapter port into position. 2 Route the power-adapter-port cable through the routing guides on the computer base. 3 Connect the power-adapter-port cable to the system board. 4 Adhere the display cable to the fan. 5 Slide the display cable into the system-board connector and press down on the connector latch to secure the cable. 6 Adhere the tape to the system board. Postrequisites 1 Replace the palm-rest. See "Replacing the Palm-Rest" on page 36. 2 Replace the keyboard. See "Replacing the Keyboard" on page 20. 3 Follow the instructions from step 3 to step 5 in "Replacing the Hard Drive" on page 28. 4 Replace the base cover. See "Replacing the Base Cover" on page 22. 5 Replace the battery. See "Replacing the Battery" on page 13. 46 | Replacing the Power-Adapter Port