Dell Inspiron 14 3468 Inspiron 14 3000 Service Manual - Page 71
Replacing the display assembly, Procedure, Post-requisites
View all Dell Inspiron 14 3468 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Replacing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the display hinges with the screw holes on the computer base. 2 Replace the screws that secure the display hinges to the computer base. 3 Route the display cable through the routing guides on the computer base. 4 Route the antenna cables through the routing guides on the computer base and slide the antenna cables through the slot on the computer base. 5 Slide the I/O-board cable into the I/O board and close the latch to secure the cable. Post-requisites 1 Follow the procedure from step 4 to step 8 in "Replacing the system board". 2 Follow the procedure from step 4 to step 11 in "Replacing the palm rest". 3 Replace the keyboard. 4 Replace the wireless card. 5 Replace the memory modules. 6 Follow the procedure from step 4 to step 6 in "Replacing the hard drive". 7 Replace the base cover. 8 Replace the battery. 71