Dell Inspiron 14 5447 Owners Manual - Page 45
Replacing the Heat Sink, Procedure, Post-requisites
View all Dell Inspiron 14 5447 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Replacing the Heat Sink WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. CAUTION: Incorrect alignment of the heat sink can cause damage to the system board and processor. NOTE: The original thermal grease can be reused if the original system board and fan are reinstalled together. If either the system board or the fan is replaced, use the thermal pad provided in the kit to make sure that thermal conductivity is achieved. Procedure 1 Align the screw holes on the heat sink with the screw holes on the system board. 2 In sequential order (as indicated on the heat sink), replace the screws that secure the heat sink to the system board. Post-requisites 1 Replace the base frame. 2 Replace the keyboard. 3 Replace the fan. 4 Replace the hard drive. 5 Replace the battery. 6 Replace the base cover. 45