Dell Inspiron 14 5452 Service Manual - Page 78
Replacing the display assembly, Procedure, Post-requisites
View all Dell Inspiron 14 5452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Replacing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Place the palm rest at the edge of the table with the speakers facing away from the edge. 2 Align the screw holes on the palm-rest assembly with the screw holes on the display hinges. 3 Replace the screws that secure the display hinges to the palm-rest assembly. 4 Route the antenna cables through its routing guides on the palm-rest assembly. 5 Route the display cable through its routing guides on the palm-rest assembly. Post-requisites 1 Replace the system board. 2 Replace the I/O board. 3 Replace the heat-sink assembly. 4 Replace the computer base. 5 Replace the keyboard. 6 Replace the wireless card. 7 Follow the procedure from step 5 to step 7 in "Replacing the hard drive". 8 Replace the memory modules. 78