Dell Inspiron 14 7437 Owner's Manual - Page 41
Replacing the Display Assembly, Procedure
View all Dell Inspiron 14 7437 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Replacing the Display Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Place the display assembly on the palm-rest assembly. 1 2 1 display assembly 2 palm-rest assembly 2 Align the screw holes on the display hinges with the screw holes on the palm-rest assembly. 3 Replace the screws that secure the display hinges to the palm-rest assembly. 4 Route the camera and touch-panel cable through the routing guides on the palm-rest assembly. 5 Connect camera and touch-panel cable to the system board. 6 Connect display cable to system board. 7 Adhere the tape to secure the display cable. Replacing the Display Assembly | 41