Dell Inspiron 14Z 5423 Owner's Manual - Page 61
Replacing the System Board, Procedure
View all Dell Inspiron 14Z 5423 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
24 Replacing the System Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the system setup after you replace the system board. Procedure 1 Connect the daughter-board cable to the connector on the system-board. 2 Align the screw hole on the system board with the screw hole on the computer base. 3 Replace the screw that secures the system board to the computer base. 4 Connect the display cable to the connector on the system board. 5 Adhere the coin-cell battery to the computer base. Replacing the System Board | 61