Dell Inspiron 15 3542 Owners Manual - Page 58
Replacing the Optical-Drive Connector Board, Procedure, Post-requisites
View all Dell Inspiron 15 3542 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Replacing the Optical-Drive Connector Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Slide the optical-drive connector board into the system-board connector. 2 Replace the screw that secures the optical-drive connector board to the computer base. 3 Route the antenna cables on the optical-drive connector board and slide the cables into the slot on the computer base. 4 Close the display and turn the computer over. 5 Route the antenna cables through the routing guide on the computer base. 6 Connect the antenna cables to the wireless card. See "Replacing the Wireless Card". Post-requisites 1 Follow the procedure from step 3 to step 9 in "Replacing the Palm Rest". 2 Replace the keyboard. 3 Follow the procedure from step 4 to step 5 in "Replacing the Optical Drive". 4 Follow the procedure from step 4 to step 6 in "Replacing the Hard Drive". 5 Replace the base cover. 6 Replace the battery. 58