Dell Inspiron 17 5748 Owners Manual - Page 76
Replacing the Display Assembly, Procedure, Post-requisites
View all Dell Inspiron 17 5748 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Replacing the Display Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure NOTE: These instructions are applicable only for laptops with a nontouchscreen display. 1 Place the display assembly on the computer base and align the screw holes on the display assembly with the screw holes on the computer base. 2 Replace the screws that secure the display assembly to the computer base. 3 Route the antenna cables through the routing guides on the computer base. 4 Adhere the display cable to the fan. 5 Connect the display cable to the system board. 6 Adhere the tape that secures the display cable to the system board. 7 Close the display and turn the computer over. 8 Insert the antenna cables through the slot on the computer base. 9 Route the antenna cables on the computer base. 10 Connect the antenna cables to the wireless card. Post-requisites 1 Replace the palm rest. 2 Replace the keyboard. 3 Follow the procedure from step 4 to step 5 in replacing the optical drive. 4 Follow the procedure from step 3 to step 5 in replacing the hard drive. 5 Replace the base cover. 76