Dell Inspiron 17 5759 Service Manual - Page 68
Removing the battery-connector board, Prerequisites, Procedure
View all Dell Inspiron 17 5759 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Removing the batteryconnector board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the battery. 2 Remove the base cover. 3 Follow the procedure from step 1 to step 3 in "Removing the hard drive". 4 Remove the wireless card. 5 Remove the memory modules. 6 Remove the keyboard. 7 Follow the procedure from step 1 to step 4 in "Removing the optical drive". 8 Follow the procedure from step 1 to step 6 in "Removing the computer base". 9 Remove the I/O board. 10 Remove the heat-sink assembly. 11 Remove the system board. Procedure 1 Peel off the tapes that secure the antenna cable to the palm-rest assembly. 2 Remove the antenna cable from the routing guides on the batteryconnector board. 3 Remove the screws that secure the battery-connector board to the palm-rest assembly. 68