Dell Inspiron 17R SE 7720 Owner's Manual - Page 40
hot-key board cable, Using your fingertips
View all Dell Inspiron 17R SE 7720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2 Turn the computer over and open the display as far as possible. 3 Remove the screws that secure the palm rest to the computer base. 4 Lift the connector latches and pull the pull-tabs to disconnect the hot-key board cable, power-button board cable, and touch-pad cable from the connectors on the system board. CAUTION: Carefully separate the palm rest from the display assembly to avoid damage to the display assembly. 5 Using your fingertips, push the palm rest up from the slot in the optical-drive bay. 6 Carefully pry out the palm rest and then ease the palm rest from the computer base. 123 4 5 7 6 1 hot-key board cable 2 pull-tab 3 connector latch 4 screws (4) 5 palm rest 6 touch-pad cable 7 power-button board cable 40 | Palm Rest
40
|
Palm Rest
2
Turn the computer over and open the display as far as possible.
3
Remove the screws that secure the palm rest to the computer base.
4
Lift the connector latches and pull the pull-tabs to disconnect the
hot-key board cable, power-button board cable, and touch-pad cable from the
connectors on the system board.
CAUTION: Carefully separate the palm rest from the display assembly to avoid
damage to the display assembly.
5
Using your fingertips, push the palm rest up from the slot in the optical-drive bay.
6
Carefully pry out the palm rest and then ease the palm rest from the computer
base.
1
hot-key board cable
2
pull-tab
3
connector latch
4
screws (4)
5
palm rest
6
touch-pad cable
7
power-button board cable
7
6
3
4
2
1
5