Dell Inspiron 17R SE Owner's Manual - Page 37
Replacing the mSATA Card
View all Dell Inspiron 17R SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Replacing the mSATA Card Procedure 1 Remove the new mSATA card from its packaging. 2 Align the notch on the mSATA card with the tab on the system-board connector. CAUTION: Use firm and even pressure to slide the mSATA card into place. If you use excessive force, you may damage the connector. CAUTION: To avoid damage to the mSATA card, never place cables under the mSATA card. 3 Insert the mSATA card connector at a 45-degree angle into the system-board connector. 4 Press the other end of the mSATA card down into the slot on the system board and replace the screw that secures the mSATA card to the system-board connector. Postrequisites 1 Replace the base cover. See "Replacing the Base Cover" on page 20. 2 Replace the battery. See "Replacing the Battery" on page 13. 3 Follow the instructions in "After Working Inside Your Computer" on page 11. mSATA Card (Optional) | 37