Dell Inspiron 20 3043 Service Manual - Page 40
Memory, Module, Heat Sink - battery
View all Dell Inspiron 20 3043 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
6 Remove the screws that secure the system-board to the system-board bracket. 7 Lift the system board at an angle and release the ports on the system board from the slots on the system-board bracket. 8 Turn the system board over and place it on a clean and flat surface. 1 coin-cell battery 3 screws (6) 5 system-board bracket 2 coin-cell battery cable 4 system board 9 Follow the instructions from step 1 to step 2 in "Removing the Memory Module". 10 Follow the instructions from step 1 to step 2 in "Removing the Heat Sink". 40
6
Remove the screws that secure the system-board to the system-board
bracket.
7
Lift the system board at an angle and release the ports on the system
board from the slots on the system-board bracket.
8
Turn the system board over and place it on a clean and flat surface.
1
coin-cell battery
2
coin-cell battery cable
3
screws (6)
4
system board
5
system-board bracket
9
Follow the instructions from step 1 to step 2 in “Removing the
Memory
Module
”.
10
Follow the instructions from step 1 to step 2 in “Removing the
Heat Sink
”.
40