Dell Inspiron 3050 Micro Desktop Inspiron 3050 Service Manual - Page 51
Replacing the system board, Procedure, Post-requisites
View all Dell Inspiron 3050 Micro Desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Replacing the system board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board. NOTE: Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must make the desired changes again after you replace the system board. Procedure Place the system board on a clean, flat surface. Post-requisites 1 Replace the solid-state drive. 2 Replace the coin-cell battery. 3 Replace the wireless card. 4 Replace the memory module. 5 Replace the processor heat-sink. 6 Replace the processor fan. 7 Replace the base cover. 51