Dell Inspiron 3268 Service Manual - Page 41

Replacing the optical drive, Procedure, Post-requisites

Get Dell Inspiron 3268 PDF manuals and user guides View all Dell Inspiron 3268 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Replacing the optical drive WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Align and snap the optical-drive bezel to the optical drive. 2 Align the screw holes on the optical drive with the screw holes on the drive cage. 3 Replace the three screws (M2xL2) that secure the optical drive to the drive cage. 4 Slide the drive cage into the slot on the chassis and snap it into place. 5 Align the screw hole on the drive cage with the screw hole on the chassis. 6 Replace the two screws (#6-32xL3.6) that secure the drive cage to the chassis. 7 Connect the data cable and power cable to the optical drive. 8 Connect the data cables and power cables to the hard drives. Post-requisites 1 Replace the front bezel. 2 Replace the computer cover. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Replacing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance
.
Procedure
1
Align and snap the optical-drive bezel to the optical drive.
2
Align the screw holes on the optical drive with the screw holes on the drive
cage.
3
Replace the three screws (M2xL2) that secure the optical drive to the drive
cage.
4
Slide the drive cage into the slot on the chassis and snap it into place.
5
Align the screw hole on the drive cage with the screw hole on the chassis.
6
Replace the two screws (#6-32xL3.6) that secure the drive cage to the chassis.
7
Connect the data cable and power cable to the optical drive.
8
Connect the data cables and power cables to the hard drives.
Post-requisites
1
Replace the
front bezel
.
2
Replace the
computer cover
.
41