Dell Inspiron 3471 Service Manual - Page 49
Removing the power-button module, Prerequisites, Procedure
View all Dell Inspiron 3471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
28 Removing the power-button module NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1. Remove the computer cover. 2. Remove the front bezel. 3. Follow the procedure from step 1 to step 6 in "Removing the optical drive". Procedure 1. Remove the screw (#6-32x6.35) that secures the front-I/O bracket to the chassis. 2. Gently release the ports on the front-I/O bracket from the slots on the chassis and move the front-I/O bracket away from the chassis. 3. Disconnect the power-button cable from the system board. 4. Press the tabs on the power-button module to release the module from the front panel. Removing the power-button module 49