Dell Inspiron 3700 Dell Inspiron 3700 Advanced Port Replicator User's Guid - Page 8

To attach external devices to the APR, perform the following steps: 1. Refer to Figure 1 to attach external devices to the appropriate connectors on the back of the APR. NOTE: If the cable connector from the external device has thumbscrews, be sure to tighten them to ensure a proper connection. For detailed information on using external devices with your computer, see "Using External Devices" in the system Help. 2. Connect the external devices to an electrical outlet, if applicable. You must attach an AC adapter to the APR before you dock and turn on the computer. The AC adapter powers the APR and the computer at the same time. Any battery installed in the computer charges while you use the APR. Before you initially connect your computer to the APR, the operating system must complete its setup process. To verify that the operating system has completed the setup process, perform the following steps: 1. Be sure that the computer is not docked in the APR. 2. Turn on the computer. 3. Verify that your computer's operating system completes the setup process. For instructions, refer to the Setup Guide that accompanied your computer. 4. Turn off the computer. You can now connect your computer to the APR as described in the following subsection, "Docking the Computer." 4 Dell Inspiron 3700 System Advanced Port Replicator User's Guide