Dell Inspiron 546MT Dell™ Technology Guide - Page 88
Configuring RAID, Assigning New Drives to a RAID Array With the Operating System
View all Dell Inspiron 546MT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
4 Press the left- and right-arrow keys to highlight RAID On, and then press . 5 Repeat the process, as needed, for each hard drive. NOTE: Hard drives in a RAID configuration should be of equal size to avoid unallocated space. 6 Press , press the left- and right-arrow keys to highlight Save/Exit, and then press to exit the system setup program and resume the boot process. Configuring RAID Your computer can be configured for RAID, even if you did not select a RAID configuration when the computer was purchased. This can be done before or after the operating system is installed. Depending on your computer, you will use either the NVIDIA (see "Using the NVIDIA Utilities" on page 88) or Intel (see "Using the Intel® RAID Utilities" on page 92) programs to create and manage RAID arrays. Using the NVIDIA Utilities If installed on your system, see the following sections for information about using the NVIDIA utilities. • "Assigning Drives to a RAID Array Before Installing the Operating System" on page 88. • "Assigning New Drives to a RAID Array With the Operating System Installed" on page 90. • "Deleting a RAID Array" on page 90. • "Converting From One RAID Configuration to Another RAID Configuration" on page 91. • "Rebuilding a RAID Configuration (RAID 1 only)" on page 92. Assigning Drives to a RAID Array Before Installing the Operating System NOTICE: The following procedure deletes all data on your hard drive(s). Back up any data you want to keep before continuing. 1 Enable RAID for each applicable hard drive on your computer (see "Setting Your Computer to RAID-Enabled Mode" on page 87). 88 Drives and Media