Dell Inspiron B130 Owner's Manual - Page 95

Keyboard

Page 95 highlights

3 Turn the computer right-side up, and then open the display all the way (180 degrees) so that it rests on your work surface. NOTICE: To avoid damaging the hinge cover, do not lift the cover on both sides simultaneously. 4 Insert a scribe in the indent to lift the hinge cover on the right side. 1 2 1 hinge cover 2 indent 5 Ease the hinge cover up, moving from right to left, and remove it. 6 To replace the hinge cover, insert the left edge of the cover into place. 7 Press from left to right until the cover snaps into place. 8 Close the display and turn the computer upside-down. 9 Replace the battery. See "Replacing the Battery." Keyboard CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). 1 Follow the procedures in "Before You Begin." 2 Remove the hinge cover. See "Hinge Cover." Adding and Replacing Parts 95

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142

Adding and Replacing Parts
95
3
Turn the computer right-side up, and then open the display all the way (180 degrees) so that it rests on
your work surface.
NOTICE:
To avoid damaging the hinge cover, do not lift the cover on both sides simultaneously.
4
Insert a scribe in the indent to lift the hinge cover on the right side.
5
Ease the hinge cover up, moving from right to left, and remove it.
6
To replace the hinge cover, insert the left edge of the cover into place.
7
Press from left to right until the cover snaps into place.
8
Close the display and turn the computer upside-down.
9
Replace the battery. See “
Replacing the Battery
.”
Keyboard
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product
Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as a connector on the back of the computer).
1
Follow the procedures in “
Before You Begin
.”
2
Remove the hinge cover. See “
Hinge Cover
.”
1
hinge cover
2
indent
1
2