Dell Inspiron One 2305 Service Manual - Page 40
Replacing the System, Board Shield, step 4, step 5, Replacing the Front Stand, Replacing the Back
View all Dell Inspiron One 2305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
4. Adhere the silver foil on the processor heat-sink. 5. Connect the processor heat-sink fan cable to the connector (CPU FAN) on the system board. 6. Replace the system-board shield (see Replacing the System-Board Shield). 7. Follow the instructions from step 4 to step 5 in Replacing the Front Stand. 8. Replace the back cover (see Replacing the Back Cover). CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. 9. Connect your computer and all attached devices to electrical outlets, and turn them on. Back to Contents Page
4.
Adhere the silver foil on the processor heat-sink.
5.
Connect the processor heat-sink fan cable to the connector (CPU FAN) on the system board.
6.
Replace the system-board shield (see
Replacing the System
-
Board Shield
).
7.
Follow the instructions from
step 4
to
step 5
in
Replacing the Front Stand
.
8.
Replace the back cover (see
Replacing the Back Cover
).
9.
Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.