Dell Latitude 10 - ST2 Dell Latitude 10 - ST2 Owner's Manual - Page 21
Installing the SmartCard Reader, Removing the Wireless Wide Area Network (WWAN) Card
View all Dell Latitude 10 - ST2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Installing the SmartCard Reader 1. Place the SmartCard reader into its slot. 2. Tighten the screws to secure the SmartCard reader to the system board. 3. Install the : a) base cover b) battery 4. Follow the procedures in After Working Inside Your Computer. Removing the Wireless Wide Area Network (WWAN) Card NOTE: The WWAN Card is an optional component. 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the : a) battery b) base cover c) SmartCard reader 3. Disconnect antennae connected to the WWAN card. Lift up the system board connector to release the WWAN card. 21
Installing the SmartCard Reader
1.
Place the SmartCard reader into its slot.
2.
Tighten the screws to secure the SmartCard reader to the system board.
3.
Install the :
a)
base cover
b)
battery
4.
Follow the procedures in
After Working Inside Your Computer.
Removing the Wireless Wide Area Network (WWAN) Card
NOTE:
The WWAN Card is an optional component.
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the :
a)
battery
b)
base cover
c)
SmartCard reader
3.
Disconnect antennae connected to the WWAN card. Lift up the system board connector to release the WWAN
card.
21