Dell Latitude 10 - ST2e Dell Latitude 10 - ST2e Owner's Manual - Page 19
Installing the Volume-Button Board - drivers
View all Dell Latitude 10 - ST2e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
b) battery 3. Disconnect the volume-board cable from the connector. Lift up and remove the volume-board cable from the system board. 4. Pry the sides of the volume-button board with a flat-head screw driver to loosen it from it's slot on the computer. Remove the volume-button board from the computer Installing the Volume-Button Board 1. Place the volume-button board in it's slot on the computer. 2. Route and connect the volume-board cable to the connector. 3. Install the: a) battery b) base cover 4. Follow the procedures in After Working Inside Your Computer. 19
b)
battery
3.
Disconnect the volume-board cable from the connector. Lift up and remove the volume-board cable from the
system board.
4.
Pry the sides of the volume-button board with a flat-head screw driver to loosen it from it's slot on the computer.
Remove the volume-button board from the computer
Installing the Volume-Button Board
1.
Place the volume-button board in it's slot on the computer.
2.
Route and connect the volume-board cable to the connector.
3.
Install the:
a)
battery
b)
base cover
4.
Follow the procedures in
After Working Inside Your Computer
.
19