Dell Latitude 10e ST2E Dell Latitude 10 - ST2e Owner's Manual - Page 16
Removing the System Board, Before Working Inside Your Computer
View all Dell Latitude 10e ST2E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Removing the System Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) base cover b) battery c) speaker d) front camera e) docking board 3. Disconnect the LVDS and docking board cables. 4. Remove the screws that secure the system board to the computer. 5. Lift up the system board at a 45° angle and pull it away from the computer. Installing the System Board 1. Place the system board in its compartment on the computer. 2. Tighten the screws to secure the system board to the computer. 3. Connect the LVDS and docking board cables to the system board. 16
Removing the System Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
base cover
b)
battery
c)
speaker
d)
front camera
e)
docking board
3.
Disconnect the LVDS and docking board cables.
4.
Remove the screws that secure the system board to the computer.
5.
Lift up the system board at a 45° angle and pull it away from the computer.
Installing the System Board
1.
Place the system board in its compartment on the computer.
2.
Tighten the screws to secure the system board to the computer.
3.
Connect the LVDS and docking board cables to the system board.
16