Dell Latitude 14 Rugged 5404 Dell Latitude 14 Rugged Statement of Volatility - Page 1

Statement of Volatility - Dell Latitude 14 Rugged (5404) CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. The Dell Latitude 14 Rugged (5404) contains both volatile and non-volatile (NV) components. Volatile components lose their data immediately after power is removed from the component. Non-volatile (NV) components continue to retain their data even after power is removed from the component. The following NV components are present on the Dell Latitude 14 Rugged (5404) system board. Table 1. List of Non-Volatile Components on System Board Description Reference Designator Volatility Description User Accessible for external data Remedial Action (Action necessary to prevent loss of data) Embedded U38 Flash in embedded controller MEC5035 256 KB and 2K byte of No embedded Flash memory for keyboard controller BIOS code, asset tag and BIOS passwords Panel Part of panel Non Volatile memory, 64K No EEDID assembly bytes. Stores panel EEPROM manufacturing information, display data System BIOS U1, U2 Non Volatile memory, 64 Mbit No (8 MB), 32Mbit (4MB) System BIOS and Video BIOS for basic boot operation, PSA (on board diags), PXE diags. System Memory - DDR3 memory System memory SPD EEPROM Connectors Volatile memory in OFF state Yes JDIMM1 and JDIMM2 One or two modules must be populated. System memory size will depend on SODIMM modules and must be between 1 GB and 8 GB. On System Non Volatile memory 2Kbit No memory (256 bytes). One device SODIMM(s) present on each SODIMM. - 1-2 present Stores memory manufacturer data and timing information for correct operation of system memory. RTC UC1 CMOS - BBRAM (battery backed Non Volatile memory, 256 No Bytes. Stores CMOS information. N/A Part of panel assembly N/A Power off system N/A N/A Month yyyy