Dell Latitude 5290 Owners Manual - Page 6

Removing and installing components, Recommended tools - 2 in 1 drivers

Page 6 highlights

2 Removing and installing components Topics: • Recommended tools • Screw size list • Subscriber Identity Module(SIM) board • Base cover • Battery • Solid state drive • Hard drive • Coin cell battery • Heat sink assembly • WLAN card • WWAN card - optional • Memory modules • Keyboard • Power connector port • Chassis frame • SmartCard module • Speaker • System board • Display assembly • Display bezel • Display hinge cover • Display hinges • Display panel • Camera • Display (eDP) cable • Display back cover assembly • Palm rest Recommended tools The procedures in this document require the following tools: • Phillips #0 screwdriver • Phillips #1 screwdriver • Plastic scribe NOTE: The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4 6 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93

Removing and installing components
Topics:
Recommended tools
Screw size list
Subscriber Identity Module(SIM) board
Base cover
Battery
Solid state drive
Hard drive
Coin cell battery
Heat sink assembly
WLAN card
WWAN card – optional
Memory modules
Keyboard
Power connector port
Chassis frame
SmartCard module
Speaker
System board
Display assembly
Display bezel
Display hinge cover
Display hinges
Display panel
Camera
Display (eDP) cable
Display back cover assembly
Palm rest
Recommended tools
The procedures in this document require the following tools:
Phillips #0 screwdriver
Phillips #1 screwdriver
Plastic scribe
NOTE:
The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4
2
6
Removing and installing components