Home » Dell Manuals » Laptops » Dell Latitude 5580 » Manual Viewer

Dell Latitude 5580 Owners Manual - Page 71

Option, Description, type of USB Mass Storage Devices HDD, memory key

Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

Option SATA Operation Description Allows you to configure the internal SATA hard-drive controller. The options are: • Disabled • AHCI • RAID On: This option is enabled by default. Drives Allows you to configure the SATA drives on board. All drives are enabled by default. The options are: • SATA-0 • SATA-2 • SATA-4 • M.2 PCI-e SSD-0 SMART Reporting This field controls whether hard drive errors for integrated drives are reported during system startup. This technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. This option is disabled by default. • Enable SMART Reporting USB Configuration This is an optional feature. This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any type of USB Mass Storage Devices (HDD, memory key, floppy). If USB port is enabled, device attached to this port is enabled and available for OS. If USB port is disabled, the OS cannot see any device attached to this port. The options are: • Enable USB Boot Support (by default enable) • Enable External USB Port (by default enable) • Enable Thunderbolt Ports (by default enable) • Enable Thunderbolt Boot Support • Always Allow Dell Docks (by default enable) • Enable Thunderbolt (ans PCIe behind TBT) Pre-boot • Security level - No Secuirty • Security level - User Configuration(by default enable) • Security level - Secure connect • Security level - Display Port Only NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings. USB PowerShare Audio This field configures the USB PowerShare feature behavior. This option allows you to charge external devices using the stored system battery power through the USB PowerShare port. This field enables or disables the integrated audio controller. By default, the Enable Audio option is selected. The options are: • Enable Microphone (by default enable) • Enable Internal Speaker (by default enable) Keyboard Illumination This field lets you choose the operating mode of the keyboard illumination feature. The keyboard brightness level can be set from 0% to 100%. The options are: System setup options 71

Section	Page
Dell Latitude 5580 Owner's Manual	3
Working on your computer	8
Safety instructions	8
Before working inside your computer	8
Turning off your computer	9
Turning off your computer — Windows 10	9
Turning off your computer — Windows 7	9
After working inside your computer	9
Removing and installing components	10
Recommended tools	10
Subscriber Identity Module(SIM) board	10
Installing the Subscriber Identification Module card	10
Removing the Subscriber Identification Module card	10
Base cover	11
Removing the base cover	11
Installing the base cover	12
Battery	12
Lithium-ion battery precautions	12
Removing the battery	13
Installing the battery	13
Solid State Drive — optional	14
Removing the M.2 Solid State Drive - SSD	14
Installing the M.2 Solid State Drive - SSD	15
Hard drive	15
Removing hard drive assembly	15
Installing the hard drive assembly	16
Coin cell battery	16
Removing the coin cell battery	16
Installing the coin cell battery	17
WLAN card	18
Removing the WLAN card	18
Installing the WLAN card	18
WWAN card	19
Removing the WWAN card	19
Installing the WWAN card	19
Memory module	19
Removing the memory module	19
Installing the memory module	20
Keyboard	20
Removing the keyboard trim	20
Removing the keyboard	21
Installing the keyboard	24
Installing the keyboard trim	24
Heat sink	25
Removing the heat sink	25
Installing the heat sink	25
System fan	26
Removing the system fan	26
Installing the system fan	26
Power connector port	27
Removing the power connector port	27
Installing the power connector port	27
Chassis frame	28
Removing the chassis frame	28
Installing the chassis frame	29
System board	29
Removing the system board	29
Installing the system board	32
Touchpad panel	32
Removing the touchpad buttons	32
Installing the touchpad panel	34
SmartCard module	34
Removing the SmartCard reader	34
Installing the SmartCard reader	36
LED board	36
Removing the LED board	36
Installing the LED board	37
Speaker	38
Removing the speaker	38
Installing the speaker	39
Hinge cap	39
Removing the hinge cap	39
Installing the hinge cap	40
Display assembly	40
Removing the display assembly	40
Installing the display assembly	44
Display bezel	44
Removing the display bezel	44
Installing the display bezel	45
Display hinges	45
Removing the display hinge	45
Installing the display hinge	46
Display panel	47
Removing the display panel	47
Installing the display panel	48
eDP cable	49
Removing the eDP cable	49
Installing the eDP cable	49
Camera	50
Removing the camera	50
Installing the camera	51
Display back cover assembly	51
Removing the display back cover assembly	51
Installing the display back cover assembly	52
Palm rest	52
Replacing the palm rest	52
Technology and components	54
Power adapter	54
Processors	54
Skylake processor	54
Identifying processors in Windows 10	55
Verifying the processor usage in Task Manager	55
Verifying the processor usage in Resource Monitor	55
Chipsets	56
Intel chipset drivers	56
Downloading the chipset driver	57
Identifying the chipset in Device Manager on Windows 10	57
Graphic options	58
Intel HD Graphics drivers	58
Downloading drivers	58
Display options	59
Identifying the display adapter	59
Changing the screen resolution	59
Rotating the display	59
Adjusting brightness in Windows 10	60
Cleaning the display	60
Using touch screen in Windows 10	60
Connecting to external display devices	61
Realtek ALC3246 Waves MaxxAudio Pro controller	61
Downloading the audio driver	61
Identifying the audio controller in Windows 10	61
Changing the audio settings	62
WLAN cards	62
Secure Boot screen options	62
Hard drive options	62
Identifying the hard drive in Windows 10	63
Identifying the hard drive in the BIOS	63
Camera features	63
Identifying the camera in Device Manager on Windows 10	63
Starting the camera	63
Starting the camera application	64
Memory features	65
Verifying system memory in Windows 10	65
Verifying system memory in system setup BIOS	65
Testing memory using ePSA	65
Realtek HD audio drivers	65
Thunderbolt over USB Type-C	66
Thunderbolt 3 over USB Type-C	66
Key Features of Thunderbolt 3 over USB Type-C	66
Thunderbolt Icons	67
System setup options	68
Boot Sequence	68
Navigation keys	69
System Setup overview	69
Accessing System Setup	69
General screen options	69
System Configuration screen options	70
Video screen options	73
Security screen options	73
Secure Boot screen options	75
Intel Software Guard Extensions	75
Performance screen options	76
Power Management screen options	76
POST Behavior screen options	78
Virtualization support screen options	79
Wireless screen options	79
Maintenance screen options	80
System Log screen options	80
Updating the BIOS in Windows	80
System and setup password	81
Assigning a system setup password	81
Deleting or changing an existing system setup password	82
Technical specifications	83
System specifications	83
Processor specifications	84
Memory specifications	84
Storage specifications	84
Audio specifications	85
Video specifications	85
Camera specifications	85
Communication specifications	86
Port and connector specifications	86
Contactless smart card specifications	86
Display specifications	87
Keyboard specifications	87
Touchpad specifications	88
Battery specifications	88
AC Adapter specifications	89
Physical specifications	89
Environmental specifications	90
Diagnostics	91
Enhanced Pre-Boot System Assessment ePSA diagnostics	91
Device status lights	92
Battery status lights	93
Troubleshooting	93
Enhanced Pre-Boot System Assessment — ePSA diagnostics	93
LAN status LED	94
Real Time Clock reset	94

Match case Limit results 1 per page

Option

Description

SATA Operation

Allows you to

conﬁgure

the internal SATA hard-drive controller. The options are:

•

Disabled

•

AHCI

•

RAID On: This option is enabled by default.

Drives

Allows you to

conﬁgure

the SATA drives on board. All drives are enabled by default. The options are:

•

SATA-0

•

SATA-2

•

SATA-4

•

M.2 PCI-e SSD-0

SMART Reporting

This

ﬁeld

controls whether hard drive errors for integrated drives are reported during system startup. This

technology is part of the SMART (Self Monitoring Analysis and Reporting Technology)

speciﬁcation.

This option is

disabled by default.

•

Enable SMART Reporting

USB

Conﬁguration

This is an optional feature.

This

ﬁeld

conﬁgures

the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any

type of USB Mass Storage Devices (HDD, memory key,

ﬂoppy).

If USB port is enabled, device attached to this port is enabled and available for OS.

If USB port is disabled, the OS cannot see any device attached to this port.

The options are:

•

Enable USB Boot Support (by default enable)

•

Enable External USB Port (by default enable)

•

Enable Thunderbolt Ports (by default enable)

•

Enable Thunderbolt Boot Support

•

Always Allow Dell Docks (by default enable)

•

Enable Thunderbolt (ans PCIe behind TBT) Pre-boot

•

Security level — No Secuirty

•

Security level — User

Conﬁguration(by

default enable)

•

Security level — Secure connect

•

Security level — Display Port Only

NOTE:

USB keyboard and mouse always work in the BIOS setup irrespective of these settings.

USB PowerShare

This

ﬁeld

conﬁgures

the USB PowerShare feature behavior. This option allows you to charge external devices using

the stored system battery power through the USB PowerShare port.

Audio

This

ﬁeld

enables or disables the integrated audio controller. By default, the

Enable Audio

option is selected. The

options are:

•

Enable Microphone (by default enable)

•

Enable Internal Speaker (by default enable)

Keyboard

Illumination

This

ﬁeld

lets you choose the operating mode of the keyboard illumination feature. The keyboard brightness level

can be set from 0% to 100%. The options are:

System setup options