Dell Latitude ATG D630 User's Guide - Page 122
Coin-Cell Battery, Memory
View all Dell Latitude ATG D630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Coin-Cell Battery CAUTION: Before performing the following procedures, follow the safety instructions in your Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer. NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer. 1 Follow the procedures in "Before You Begin" on page 115. 2 Remove the hinge cover (see "Hinge Cover" on page 118). 3 Remove the keyboard (see "Keyboard" on page 119). 1 2 3 1 coin-cell battery connector 2 coin-cell battery 3 plastic arm 4 Remove the coin-cell battery connector from the connector on the system board. 5 Being careful not to break the plastic, slightly raise the corner of the mylar above the battery. 6 While holding the mylar, grasp the battery and pull out of the battery compartment. Memory You can increase your computer memory by installing memory modules on the system board. See "Specifications" on page 141 for information on the memory supported by your computer. Install only memory modules that are intended for your computer. 122 Adding and Replacing Parts