Dell Latitude D620 ATG Service Manual - Page 28

Subscriber Identity Module SIM Card

Page 28 highlights

1 Mobile Broadband network card 2 antenna cables (2) NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your Mobile Broadband network card. 6. Connect the antenna cables to the Mobile Broadband network card, ensuring that you route the cables correctly. Subscriber Identity Module (SIM) Card CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. 1. Follow the procedures in Before You Begin. 1 SIM card 2 metal brackets (2) NOTICE: Do not touch the SIM card connectors to protect the card from electrostatic discharge (ESD). To prevent ESD, hold the card in your hand before you insert or remove the card. 2. Turn the computer upside-down with the front of the computer facing you. 3. Ensure that the battery is removed (see Before Working Inside Your Computer). 4. With the cut-off corner on the card facing away from the card compartment, insert the SIM card into the compartment (as shown) so that it slides under the metal bracket on the sides. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

6.
Connect the antenna cables to the Mobile Broadband network card, ensuring that you route the cables correctly.
Subscriber Identity Module (SIM) Card
1.
Follow the procedures in
Before You Begin
.
2.
Turn the computer upside-down with the front of the computer facing you.
3.
Ensure that the battery is removed (see
Before Working Inside Your Computer
).
4.
With the cut-off corner on the card facing away from the card compartment, insert the SIM card into the compartment (as shown) so that it slides under
the metal bracket on the sides.
Back to Contents Page
1
Mobile Broadband network card
2
antenna cables (2)
NOTE:
For more specific information about which cable to connect to which connector, see the documentation that came with your Mobile Broadband
network card.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide
.
1
SIM card
2
metal brackets (2)
NOTICE:
Do not touch the SIM card connectors to protect the card from electrostatic discharge (ESD). To prevent ESD, hold the card in your hand before
you insert or remove the card.