Dell Latitude E6230 Statement of Volatility - Page 2
Description, Reference, Designator, Volatility Description, Accessible, external, Remedial Action - remove hard drive
View all Dell Latitude E6230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Description Reference Designator Volatility Description RTC CMOS UH4 Non-volatile memory 256 bytes. Stores CMOS information. User Accessible for external data Remedial Action (Action necessary to prevent loss of data) No Remove the on-board coin-cell battery. Video UMA Volatile memory in off state. No memory - architecture 1 GB gDDR5 for discrete type - see uses system graphics systems. UMA uses next column DDR3. main system memory size Discrete allocated out of main graphics memory. systems use gDDR5 (UV3-UV6) for frame buffer. Security U4 (up-sell USH Non Volatile memory, 16 Mbit No Controller daughter board) (2Mbyte). Serial Flash Memory Security Controller U2 (up-sell 128K byte ROM, 128K bit one-time No USH daughter programmable. board) TPM U39 Controller Non Volatile memory, 2K bits NA (256 bytes) ROM. Hard drive User Non-volatile magnetic Yes replaceable media, various sizes in GB. CD- User Non-volatile Yes ROM/RW/ replaceable optical/magnetic media. DVD/ DVD+RW/ Diskette Drives Enter S3-S5 state below. N/A N/A NA Low-level format Low-level format/erase CAUTION: All other components on the system board lose data if power is removed from the system. Primary power loss (unplugging the power cord and removing the battery) destroys all user data on the memory (DDR3, 1333/1600 MHz). Secondary power loss (removing the on-board coin-cell battery) destroys system data on the system configuration and time-of-day information. In addition, to clarify memory volatility and data retention in situations where the system is put in different ACPI power states, the following is provided (those ACPI power states are S0, S1, S3, S4, and S5): S0 state is the working state where the dynamic RAM is maintained and is read/write by the processor. S1 state is a low wake-up latency sleeping state. In this state, no system context is lost (CPU or chipset) and hardware maintains all system contexts. S3 is called "suspend to RAM" state or stand-by mode. In this state, the dynamic RAM is maintained. Dell systems will be able to go to S3 if the OS and the peripherals used in the system supports S3 state. Linux, Win 2K and Win XP support S3 state. S4 is called "suspend to disk" state or "hibernate" mode. There is no power. In this state, the dynamic RAM is not maintained. If the system has been commanded to enter S4, the OS will write the system context to a non-volatile storage file and leave appropriate context markers. When the system is coming back to the working state, a restore file from the non-volatile storage can occur. The restore file has to be valid. Dell systems will be able to go to S4 if the OS and the peripherals support S4 state. Win 2K and Win XP support S4 state.