Dell M2400 Setup and Quick Reference Guide - Page 22
Secure Digital SD Memory Card Reader, Memory, Ports and Connectors, To enable Intel - specifications
![]() |
View all Dell M2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Secure Digital (SD) Memory Card Reader Cards supported SD, SDIO, SD HC, Mini SD (with adapter) MMC, MMC+, Mini MMC (with adapter) Memory Memory module connector two DIMM slots Memory configurations available 1 GB (one 1 GB DIMM or two 512 MB DIMMs) 2 GB (two DIMMs) 4 GB (two DIMMs) 8 GB (two DIMMS, requires 64-bit Windows XP or Windows Vista operating system) Memory type DDR2 800 MHz (if supported by chipset and/or processor combinations). Non-ECC memory only. Minimum memory 1 GB Maximum memory 8 GB (requires 64-bit Windows XP or Windows Vista operating system) NOTE: In order to take advantage of the dual-channel bandwidth capability, both memory slots must be populated and must match in size. NOTE: The available memory displayed does not reflect the complete maximum memory installed because some memory is reserved for system files. NOTE: To enable Intel® Active Management Technology (iAMT), you must have a DIMM in the memory connector labeled "A". For more information about the memory connector, see your computer's Service Manual at support.dell.com. For more information about iAMT, see the Dell™ Systems Management Administrator's Guide at support.dell.com. Ports and Connectors Audio IEEE 1394a microphone connector, stereo headphone/speakers connector 4-pin connector 22 Specifications
![](/manual_guide/products/dell-m2400-setup-quick-reference-guidenbsp-2b724e0/22.png)