Dell M5200 Medium Workgroup Mono Laser Printer Dell™ Workgroup Laser - Page 62
Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-stick
View all Dell M5200 Medium Workgroup Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
4. the corners to flatten them. Fan the envelopes. This prevents the edges of the envelopes from sticking together and helps them feed properly. NOTE: When you load envelopes, do not exceed the maximum stack height of 64.7 mm (2.55 in.). The envelope feeder holds a maximum of 85 envelopes (75 g/m2, 20 lb bond). 5. Load the stack of envelopes flap side down with the stamp area and the flap on the left. The end of the envelopes with the stamp area enters the envelope feeder first. Let the envelopes at the bottom of the stack slide into the envelope feeder slightly more than the ones at the top of the stack. NOTICE: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-stick adhesives. These envelopes may severely damage the printer. See Envelopes for more information. NOTE: Do not try to load more envelopes by forcing them under the envelope weight. This results in jams. 6. Slide the width guide to the left until it lightly touches the stack. Make sure the envelopes do not buckle.