Dell MX9116n SmartFabric OS10 Security Best Practices Guide July 2020 - Page 5
Password rules
![]() |
View all Dell MX9116n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Rationale: Even if you disable the linuxadmin user, users can access Linux commands using the system command. To disable access to Linux commands completely, use the system-cli command. Configuration: OS10(config)# system-cli disable OS10(config)# exit OS10# write memory Disable unused interfaces Rationale: To prevent unauthorized users from connecting to your network on front-end interfaces, disable the interfaces that you are not using. Configuration: OS10(config)# interface range ethernet 1/1/10-1/1/32 OS10(conf-range-eth1/1/10-1/1/32)# shutdown OS10(conf-range-eth1/1/10-1/1/32)# end OS10# write memory Enable bootloader protection Rationale: To prevent unauthorized users with malicious intent from accessing your switch, protect the bootloader using a GRUB password. Configuration: OS10# boot protect enable username username password password OS10# write memory Password rules Strict password rules ensure better security of the device. Enable strong passwords Rationale: Strong passwords make it difficult guess your passwords. By default, strong password check is enabled on the system which checks if the password contains at least characters with alphanumeric and special characters. If strong password check is disabled, enable it. Configuration: OS10(config)# no service simple-password OS10(config)# exit OS10# write memory Enforce stronger passwords Rationale: By default, the password you configure must be at least nine alphanumeric and special characters. To increase the password strength further, enforce the user to use a mix of different characters and increase the password length. Configuration: OS10(config)# password-attributes {[min-length number] [character-restriction {[upper number] [lower number][numeric number] [special-char number]}} OS10(config)# exit OS10# write memory • min-length number-(Optional) Sets the minimum number of required alphanumeric characters, from 6 to 32; default 9. • character-restriction: ○ upper number-(Optional) Sets the minimum number of uppercase characters that are required, from 0 to 31; default 0. ○ lower number-(Optional) Sets the minimum number of lowercase characters that are required, from 0 to 31; default 0. ○ numeric number-(Optional) Sets the minimum number of numeric characters that are required, from 0 to 31; default 0. ○ special-char number-(Optional) Sets the minimum number of special characters that are required, from 0 to 31; default 0. OS10 security best practices 5
![](/manual_guide/products/dell-mx5108n-smartfabric-os10-security-best-practices-guide-2020-c2fefbc/5.png)