Dell N3200-ON External Power Supply Installation PowerSwitch N2200-ON and N320 - Page 5
MPS-1S two-post installation
View all Dell N3200-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
5. Turn the switch over and place on a desktop. MPS-1S two-post installation This installation procedure describes how to install an MPS-1S self in a two-post rack. Use L-brackets for front, five-inch-offset, or rear-mount two-post installation. These mounting supplies ship with the MPS-1S. 1. Remove the two L-brackets and screws from the shipping box. 2. Screw one L-bracket to the switch using the four M4 screws (length 6.8 mm). Install the brackets to the switch in front, five-inch-offset, or rear mounting positions, as shown. ● For front-mount: The mounting bracket and bracket ears face the front of the EPS. ● For five-inch-offset mount: The mounting bracket is at the front of the EPS with the bracket ears facing the back of the EPS. ● For rear-mount: The mounting bracket and bracket ears face the back of the EPS. Torque the screws to 10 inch-lbs. Front mount N-Series EPS installation 5