Dell Networking 7048 CLI Reference Guide - Page 260

Command Mode Line Configuration mode User Guidelines Use of the no form of the command does not disable authentication. Instead, it sets the authentication list to the default list (same as enable authentication default). Example The following example specifies the default authentication method when accessing a higher privilege level console. console(config)# line console console(config-line)# enable authentication default enable password Use the enable password command in Global Configuration mode to set a local password to control access to the privileged EXEC mode. To remove the password requirement, use the no form of this command. Syntax enable password password [encrypted] no enable password • password - Password for this level (Range: 8- 64 characters). • encrypted - Encrypted password entered, copied from another switch configuration. Default Configuration This command has no default configuration. Command Mode Global Configuration mode 260 AAA Commands