Dell OEM Ready Optiplex 760 Technical Guide - Page 36
Typical Configuration Declared Sound Pressure
View all Dell OEM Ready Optiplex 760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
DELL™ OPTIPLEX™ 760 TECHNICAL GUIDEBOOK V1.0 ACOUSTIC NOISE EMISSION INFORMATION OPTIPLEX 760 SFF Component CPU Memory HDD (#, capacity) RMSD Graphics Adapter Typical Configuration E7200 512MB DDRII 667MHz (x2) 80 GB 7200 RPM SATA2 DVDRW/DVD dual config Integrated GMA3100 High-end Configuration Q9650 2GB DDRII 800MHz (x4) 250 GB 7200 RPM SATA2 (x1) DVDRW/DVD dual config ATI RADEON HD 2400 XT The Declared Noise Emission in accordance with ISO 9296 for the Dell Optiplex 760 SFF is as follows: (all values LWAd expressed in bels; 1 bel=10 decibels, re 10-12 Watts) Operating Mode Idle Typical Configuration Declared Sound Power (LWAd) 3.7 High-end Configuration Declared Sound Power (LWAd) 4.2 HDD Operating 3.7 4.3 90% CPU 4.1 4.7 ODD Operating 4.9 4.8 The Declared A-weighted Sound Pressure Level in decibels (re 2x10-5 Pa), at Operator, Bystander, and Desk Side Positions are measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordance with ISO 9296 for this product is as follows1: Operating Mode Idle HDD Operating 90% CPU ODD Operating Typical Configuration Declared Sound Pressure High-end Configuration Declared Sound Pressure (LpA) (LpA) Table-Top Floor-Standing Table-Top Floor- Standing Operator Position (LpA) Bystander Position (LpA) Operator Position (LpA) Bystander Position (LpA) Operator Position (LpA) Bystander Position (LpA) Operator Position (LpA) Bystander Position (LpA) 26.9 22.6 21.9 21.1 34.6 27.8 24.9 23.8 26.5 22.5 22.1 21.2 35.1 28.3 25.1 24.1 31.8 28.7 23.2 23.0 38.2 31.7 29.5 27.7 42.8 39.8 36.6 35.4 40.0 33.8 31.8 30.4 1 All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system CPU was stressed at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO 7779, but was measured using the same microphone distances and measurement techniques defined for the other reported operating modes. 2 Declared Sound Power rounded to nearest tenth of a bel per ISO 9296 section 4.4.2 36