Dell OptiPlex 160 Dell™ Monitor Mount Tech Sheet - Page 2
WARNING, CAUTION, Thermal Restrictions, Removing Chassis From Monitor Bracket - mount
View all Dell OptiPlex 160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
WARNING: Before mounting the chassis to the monitor, ensure that none of the vents (OptiPlex™ FX160/160 has ventilation on four of the six primary surfaces) are blocked on the system. CAUTION: Before installing your computer in an enclosure, read the safety instructions that shipped with your computer. Thermal Restrictions There must be at least 1 inch (25.4mm) clearance at the back of the chassis for optimal system cooling. WARNING: Chassis front face should not be placed in the up or down position. Removing Chassis From Monitor Bracket Removing Counter Balance From Monitor 1 1 2 2 CAUTION: Before removing the counter balance, ensure the chassis is removed from the monitor bracket. 1 release tab 2 chassis 1 mounting slots 2 release tab Information in this document is subject to change without notice. © 2009 Dell Inc. All rights reserved. Printed in China. Printed on Recycled Paper. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and OptiPlex are trademarks of Dell Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.