Dell OptiPlex 3010 Statement of Volatility - Page 1
Dell OptiPlex 3010 Manual
View all Dell OptiPlex 3010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Dell Inc. One Dell Way Round Rock, TX 78682 Telephone: 512.338.4400 Telefax: 512.728.3653 Date: June 04, 2012 Subject: Statement of Volatility - Dell OptiPlex 3010 To whom it may concern: The Dell OptiPlex 3010 contains both "volatile" and "non-volatile" (NV) components. Volatile components lose their data immediately upon removal of power from the component. Non-volatile components continue to retain their data even after the power has been removed from the component. The following volatile and NV components are present on the Dell OptiPlex 3010 motherboard: Description Reference Designator Embedded U36 Flash memory in embedded controller SMSC5514E System U30 BIOS Ethernet U14 Controller Embedded Efuse Volatility Description 96K bytes in non-volatile memory User Accessible for external data No Remedial Action (action necessary to lose data) N/A Non Volatile memory, 64Mbit No N/A (8MB), System BIOS and Video BIOS for basic boot operation, PSA (on board diags.) 256 bytes in non-volatile No N/A memory, which stores driver information and the system MAC address System Memory - DDR3 DIMM memory Connectors : DIMM1, DIMM2 System memory SPD EEPROM On memory DIMM(s) - one, two, three, or four present Volatile memory in OFF state No (see state definitions later in text) One or two modules will be populated. System memory size will depend on DIMM modules and will be between 2GB to 4GB. Non-Volatile EEPROM No memory. 2Kbit (256 bytes) One Device present on each DIMM. Stores memory manufacturer data and timing information for correct operation of system memory. Power off system N/A N/A DELL CONFIDENTIAL Page 1