Dell OptiPlex 3010 Guidebook - Page 36

DELL™ OPTIPLEX™ 3010 TECHNICAL GUIDEBOOK -FINAL ACOUSTIC NOISE EMISSION INFORMATION OPTIPLEX 3010 MT Component CPU Memory HDD (#, capacity) RMSD Graphics Adapter Typical Configuration Intel i5,3.1GHZ,4c SNB 95W 4GB DDR3 1333MHz 1TB 7200RPM SATA3 16X DVD SATA HH 8X DVD+/-RW SATA 12.7 Intel® HD Graphics Family High-end Configuration Intel 95W TDP 4GB DDR3 1333MHz 1TB 7200RPM SATA3(x2) 16X DVD SATA HH 8X DVD+/-RW SATA 12.7 ATI Redeon HD 7570 The Declared Noise Emission in accordance with ISO 9296 for the Dell OptiPlex 3010 MT is as follows: (all values LWAd expressed in bels; 1 bel=10 decibels, re 10-12 Watts) Operating Mode Idle Typical Configuration Declared Sound Power (LWAd) NA High-end Configuration Declared Sound Power (LWAd) 3.2 HDD Operating NA 3.2 80% TDP NA 3.8 ODD Operating NA 4.1 The Declared A-weighted Sound Pressure Level in decibels (re 2x10-5 Pa), at Operator, Bystander, and Desk Side Positions are measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordance with ISO 9296 for this product is as Operating Mode Idle HDD Operating 90% CPU ODD Operating Typical Configuration Declared Sound Pressure High-end Configuration Declared Sound Pressure (LpA) (LpA) Table-Top Floor-Standing Operator Position (LpA) Bystander Position (LpA) Operator Posi- tion (LpA) Bystander Position (LpA) NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA Table-Top Floor- Standing Operator Position (LpA) Bystander Position (LpA) Operator Position (LpA) Bystander Position (LpA) 22.9 23.3 24.0 43.6 19.1 18.0 18.8 19.7 18.1 18.9 20.2 18.4 18.9 36.8 36.6 35.3 1 All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system CPU was stressed at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO 7779, but was measured using the same microphone distances and measurement techniques defined for the other reported operating modes. 2 Declared Sound Power rounded to nearest tenth of a bel per ISO 9296 section 4.4.2 36