Dell OptiPlex 5050 Tower Owners Manual - Page 27
Installing power supply unit (PSU
View all Dell OptiPlex 5050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installing power supply unit (PSU) Steps 1. Insert the PSU into the PSU slot and slide it toward the back of the computer until it clicks into place. 2. Tighten the screws to secure the PSU to the computer. 3. Route the PSU cables through the retention clips. 4. Connect the PSU cables to the connectors on the system board. 5. Close the front panel door. 6. Install the: a. bezel b. cover 7. Follow the procedure in After working inside your computer. Removing and installing components 27
Installing power supply unit (PSU)
Steps
1.
Insert the PSU into the PSU slot and slide it toward the back of the computer until it clicks into place.
2.
Tighten the screws to secure the PSU to the computer.
3.
Route the PSU cables through the retention clips.
4.
Connect the PSU cables to the connectors on the system board.
5.
Close the front panel door.
6.
Install the:
a.
bezel
b.
cover
7.
Follow the procedure in
After working inside your computer
.
Removing and installing components
27