Dell OptiPlex 5070 Tower Setup and Specifications - Page 25

Option Extend BIOS POST Time Full Screen Logo Warnings and Errors Description • Thorough - The system does not skip any steps in the boot process. • Auto - This allows the operating system to control this setting (this works only when the operating system supports Simple Boot Flag). This option is set to Thorough by default. This option creates an additional pre-boot delay. • 0 seconds (default) • 5 seconds • 10 seconds This option will display full screen logo if your image match screen resolution. The option Enable Full Screen Logo is not set by default. This option causes the boot process to only pause when warning or errors are detected. Choose any one of the option: • Prompt on Warnings and Errors (default) • Continue on Warnings • Continue on Warnings and Errors Manageability Table 25. Manageability Option USB provision MEBx Hotkey Description This option is not selected by default. This option is selected by default. Virtualization support Table 26. Virtualization Support Option Virtualization Description This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by the Intel Virtualization technology. • Enable Intel Virtualization Technology This option is set by default. VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided by the Intel Virtualization technology for direct I/O. • Enable VT for Direct I/O This option is set by default. Trusted Execution This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional hardware capabilities provided by Intel Trusted Execution Technology. • Trusted Execution This option is not set by default. System setup 25